Drives - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 3 Component Status

3.5 Drives

3.5 Drives
The drive information is displayed.
The following items are displayed in the Main area:
• Enclosure
The enclosure where the drive is installed is displayed.
• Slot No.
The slot number of the enclosure where the drive is installed is displayed. By clicking the drive image, the
[Drives] screen is displayed. Refer to
• Status
The drive status is displayed. Refer to
• Capacity
The capacity of the drive is displayed.
The drive capacity that is displayed for the SSD-L (*1) differs from the product's actual capacity. For
example, the drive capacity of a "1.92TB SSD-L" is displayed as "2.00 TB".
*1: SSD-Ls are available at a lower cost per capacity than conventional SSDs by optimizing the guaranteed write
endurance and the reserved space.
• Speed
The drive speed is displayed. For SSD or SSD SED, a "-" (hyphen) is displayed.
- 15000 rpm
- 10000 rpm
- 7200 rpm
"3.19 Drive Detail" (page 164)
"A.5.1 Drive Status" (page 411)
112
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for display items.
for details.
P2X0-1260-19ENZ0