Chapter 3 Component Status
3.24 Port Detail
-
Transfer Rate
The transfer speed of the port is displayed.
If the status is "
•
Auto-negotiation
•
1.5Gbit/s
•
3Gbit/s
•
6Gbit/s
-
Link Status
The link status for each Phy is displayed.
If the status is "
•
Phy#0 - 3:x
"x" indicates one of the following statuses:
-
-
-
-
-
SAS Address
The SAS address is displayed.
If the SAS address is not specified, a "-" (hyphen) is displayed.
-
Affinity Mode
The affinity mode of the port is displayed.
•
ON
•
OFF
-
Part Number
The part number of the port is displayed.
If the part number cannot be acquired, a "-" (hyphen) is displayed.
-
Serial Number
The serial number of the port is displayed.
If the serial number cannot be acquired, a "-" (hyphen) is displayed.
-
Hardware Revision
The hardware version of the port is displayed.
If the hardware version cannot be acquired, a "-" (hyphen) is displayed.
Unknown", a "-" (hyphen) is displayed.
Unknown", a "-" (hyphen) is displayed.
Link Down
1.5Gbit/s Link Up
3Gbit/s Link Up
6Gbit/s Link Up
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
185
P2X0-1260-19ENZ0