Raid Group Detail (Volume Layout) - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 6 RAID Group Status

6.6 RAID Group Detail (Volume Layout)

6.6 RAID Group Detail (Volume Layout)
Detailed information of the volume layout is displayed. Note that the [Volume Layout] tab is not displayed for
RAID groups that are registered as EXCPs.
The following items are displayed in the Main area:
• Start LBA
The first Logical Block Address (LBA) of the volume is displayed.
• Capacity
The volume capacity is displayed.
If the volume capacity exceeds 1023.99MB, the capacity is displayed in units of "GB". If the volume capacity
exceeds 1023.99GB, the capacity is displayed in units of "TB". The capacity is rounded off to two decimal
places. To check the volume capacity in units of "MB", use ETERNUS CLI.
• Volume No.
The volume number is displayed. Unused space is displayed as "Free".
• Volume Name
The volume name is displayed.
• Volume Status
The volume status is displayed. Refer to
status.
• Volume Type
The volume type is displayed.
- Standard
- WSV
- SDV
- SDPV
"A.2 Volume Status" (page 406)
321
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for detailed information of volume
P2X0-1260-19ENZ0