Key Server Status - Fujitsu ETERNUS DX60 S3 User Manual

Appendix A Status List
A.7 Key Server Status
A.7

Key Server Status

Key server status is displayed with the status name. The key server status is described below.
Normal
Setting
Network Error
Key Acquisition Failure
Key Server Error
Internal Error
*1: "Self-signed SSL certificate" or "SSL server certificate"
Status
The communication between the ETERNUS DX/AF and the key server is normal.
The key can be obtained successfully. The key server is in the normal state.
"Setting" indicates the following conditions:
•
The "SSL / KMIP Certificate" (key server certification) or SSL certificate (*1) is
not registered.
•
The network between the ETERNUS DX/AF and the key server is normal, but
connection to the key server is forbidden.
The network between the ETERNUS DX/AF and the key server is not connected
normally.
The key that is requested from the ETERNUS DX/AF does not exist in the key
server.
An error due to a failure other than key acquisition failure is detected.
Communication to the key server could not be performed due to an internal
failure of the ETERNUS DX/AF.
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Description
413
P2X0-1260-19ENZ0