Fujitsu ETERNUS DX60 S3 User Manual page 123

Chapter 3 Component Status
3.6 Controller Enclosure Detail
●
For the ETERNUS DX8700 S3/DX8900 S3
The following items are displayed in the Main area:
- Storage system image
The front view of the CE that is installed in the ETERNUS DX is displayed.
The PFM status, the BBU status, and the Bootup and Utility Device (BUD) status are displayed with an
icon. Refer to
By clicking the PFM number, the [PCIe Flash Module Detail] screen is displayed. Refer to
Module Detail" (page 137)
By clicking the BBU number, the [Battery Unit Detail] screen is displayed. Refer to
(page 97)
By clicking the BUD number, the [Bootup and Utility Device Detail] screen is displayed. Refer to
Bootup and Utility Device Detail" (page 169)
- Parts
The PFM number, the BTU number, the BCU number, and the BUD number are displayed
By clicking the PFM number, the [PCIe Flash Module Detail] screen is displayed. Refer to
Module Detail" (page 137)
By clicking the BTU number, the [Battery Unit Detail] screen is displayed. Refer to
(page 97)
By clicking the BCU number, the [Battery Charger Unit Detail] screen is displayed. Refer to
Battery" (page 97)
By clicking the BUD number, the [Bootup and Utility Device Detail] screen is displayed. Refer to
Bootup and Utility Device Detail" (page 169)
- Status
The status of each component is displayed. Refer to
- Status Code
The status code of each component is displayed.
- Error Code
The error code of each component is displayed.
"A.5 Component Status" (page 410)
for details.
for details.
for details.
for details.
for details.
123
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for details.
for details.
for details.
"A.5 Component Status" (page 410)
"3.9 PCIe Flash
"3.2.10 Battery"
"3.20
"3.9 PCIe Flash
"3.2.10 Battery"
"3.2.10
"3.20
for details.
P2X0-1260-19ENZ0