Fujitsu ETERNUS DX60 S3 User Manual page 76

Chapter 3 Component Status
3.1 Storage (Basic Information)
The following items are displayed in the Main area:
• Storage System Name
The name of the ETERNUS DX/AF is displayed.
• Model Name
The model name of the ETERNUS DX/AF is displayed.
• Serial Number
The serial number of the ETERNUS DX/AF is displayed.
• Device Identification Number
The identification number of the ETERNUS DX/AF is displayed.
• Status
The general status of the ETERNUS DX/AF is displayed. Refer to
(Detail)" (page 405)
• Battery
The battery charge level is displayed.
When the battery charge level is 90% or more, "Full Charge" is displayed. When the battery charge level is
less than 90%, "xx%" is displayed.
For the ETERNUS DX8700 S3/DX8900 S3, the lowest battery charge level among all CEs is displayed. Click
this item to display the [Controller Enclosure] screen. Refer to
details.
This item is displayed for the ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8100 S3/DX8700 S3/DX8900
S3, and the ETERNUS AF650.
• Operation Mode
The operation mode is displayed.
- Normal
The ETERNUS DX/AF is operating.
- Maintenance Mode
The ETERNUS DX/AF is under maintenance.
• Model Upgrade
Whether the model upgrade is possible or not is displayed. When this item is not displayed, the model
upgrade is not possible.
- Not Upgraded
A model upgrade has not been performed yet.
- Upgraded
A model upgrade has been performed.
for details.
76
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
"A.1.1 Storage System General Status
"3.2 Controller Enclosure" (page 81)
P2X0-1260-19ENZ0
for