Fujitsu ETERNUS DX60 S3 User Manual page 384

Chapter 8 Advanced Copy Status
8.7 Settings (Advanced Copy)
The following items are displayed in the Main area:
• SDP No.
The SDP number (fixed as "0") is displayed.
• Total Capacity
The total capacity of the SDP is displayed.
• Total Free Space
The total free space of the SDP is displayed.
• SDPE
Snap Data Pool Element (SDPE), the allocation unit for SDV, is displayed with 1GB, 2GB, or 4GB.
• Unencrypted
- Total Capacity
The total capacity of unencrypted SDP is displayed.
- Total Used Capacity
The total used capacity of unencrypted SDP is displayed.
- Total Used Capacity (%)
The usage rate of unencrypted SDP is displayed.
- Used Host Capacity
The total capacity of the SDPE that is allocated for an unencrypted SDV where a capacity shortage
caused by data writing from the host has occurred is displayed.
- Used Copy Capacity
The total capacity of the SDPE that is allocated for an unencrypted SDV where a capacity shortage
caused by SnapOPC or SnapOPC+ has occurred is displayed.
• Encrypted
- Total Capacity
The total capacity of encrypted SDP is displayed.
- Total Used Capacity
The total used capacity of encrypted SDP is displayed.
- Total Used Capacity (%)
The usage rate of encrypted SDP is displayed.
- Used Host Capacity
The total capacity of the SDPE that is allocated for an encrypted SDV where a capacity shortage caused
by data writing from the host has occurred is displayed.
- Used Copy Capacity
The total capacity of the SDPE that is allocated for an encrypted SDV where a capacity shortage caused
by SnapOPC or SnapOPC+ has occurred is displayed.
384
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0