Fujitsu ETERNUS DX60 S3 User Manual page 276

Chapter 5 Connectivity Status
5.7 Host-LU QoS
• WWN
The WWN for the selected host is displayed.
This item is displayed when the host affinity setting is configured and the selected host is "FC" or "FCoE".
• iSCSI Name
The iSCSI name for the selected host is displayed.
This item is displayed when the host affinity setting is configured and the selected host is "iSCSI".
• IP Version
The IP version of the iSCSI host is displayed. This item is displayed when the host affinity setting is
configured and the selected host is "iSCSI".
- IPv4
- IPv6
• IP Address
The IP address of the selected iSCSI host is displayed.
Note that the IPv6 address is displayed as an abbreviation. If the IP address is not specified, the field is
blank.
This item is displayed when the host affinity setting is configured and the selected host is "iSCSI".
- For IPv4 address
• xxx.xxx.xxx.xxx
xxx: 0 - 255 for other fields (decimal)
- For IPv6 address
• xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
xxxx: 0 - ffff (hexadecimal, "a" - "f" are lowercase letters)
Refer to
• SAS Address
The SAS address of the selected host is displayed.
This item is displayed when the host affinity setting is configured and the selected host is "SAS".
• CA Port : Bandwidth Limit
The location information and the bandwidth limit of the selected CA port is displayed in "CA Port :
Bandwidth Limit" format.
If the bandwidth limit has not been configured (the bandwidth has not been limited), "Unlimited" is
displayed as the "Bandwidth Limit".
• CA Port Group
If a CA port that is connected to the selected host belongs to a CA port group as a member, the CA port
group name is displayed. If a host does not belong as a member, a "-" (hyphen) is displayed.
• LUN Group : LU QoS Group
The LUN group name and LU QoS group number (between 0 and 1055) are displayed in "LUN Group : LU
QoS Group" format.
If the ETERNUS CLI command ("set mapping") is used for LUN mapping, a "-" (hyphen) is displayed as "LUN
Group".
If a LUN QoS group number has not been configured, a "- " (hyphen) is displayed as "LU QoS Group".
"IPv6 Address Notation" (page 253)
276
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for details.
P2X0-1260-19ENZ0