Fujitsu ETERNUS DX60 S3 User Manual page 308

Chapter 6 RAID Group Status
6.1 RAID Group (Basic Information)
- Temporary
A RAID group that is temporarily created while LDE is being performed
- "-" (hyphen)
A RAID group that is not used
• RAID Level
The RAID level is displayed.
- High Performance (RAID1+0)
- High Capacity (RAID5)
- High Reliability (RAID6)
- High Reliability (RAID6-FR)
- Reliability (RAID5+0)
- Mirroring (RAID1)
- Striping (RAID0)
• Total Capacity
The total capacity of the RAID groups is displayed.
The capacity is displayed in units of "GB" or "TB". Even when volumes are created in units of "GB", if the
volume capacity exceeds 1023.99GB, the capacity is displayed in units of "TB". The capacity is rounded off
to two decimal places.
• Total Free Space
The total free space in the RAID group is displayed.
If the total free capacity exceeds 1023.99MB, the capacity is displayed in units of "GB". If the total free
capacity exceeds 1023.99GB, the capacity is displayed in units of "TB". The capacity is rounded off to two
decimal places.
"Free space" means an area in the RAID group where no volume is created, and dispersed areas which
became free by creating and deleting a volume.
• Controlling CM
The Controlling CM of the RAID group is displayed (x: CE number, y: CM number).
- For the ETERNUS DX8700 S3/DX8900 S3
CE#x CM#y
- For the other models
CM#y
• Process
A process that is being performed for the RAID group is displayed. If no process is being performed, a "-"
(hyphen) is displayed.
- Recovering
Rebuild, copyback, redundant copy, or RAID group recovery is being performed.
- Expanding
Expansion of the RAID group by LDE is being performed.
- Formatting
Formatting of the RAID group is being performed.
308
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0