Fujitsu ETERNUS DX60 S3 User Manual page 243

Chapter 5 Connectivity Status
5.1 Connectivity (Basic Information)
Display Examples of Host Affinities
Display examples of host affinities are shown in the following table.
Example
No.
Example Host_
1 Group_
xxx
Example All
2
Example –
3
Example –
4
Display contents
Host Host CA Port
Group Group
Host_1 Port_
Show... Group_
xxx
All Port_
Group_
yyy
Host_z –
All –
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
CA Port LUN Host
Group Response
CM#0 LUN_ Host_
CA#0 Group_ Response1
Port#0 xxx
Show...
CM#0 LUN_ Host_
CA#1 Group_ Response2
Port#1 yyy
CM#0 LUN_ Host_
CA#0 Group_ Response3
Port#0 zzz
CM#1 LUN_ Host_
CA#1 Group_ Response4
Port#1 www
243
Description
The host affinity setting has
been configured in
"Host_Group_xxx",
"Port_Group_xxx" and
"LUN_Group_xxx". The server
recognizes the LUN group,
"LUN_Group_xxx", which has
been specified for each member
host (HBA) in "Host_Group_xxx".
In the host field, the name of
the host that configures
"Host_Group_xxx" is displayed.
In the CA port field, the location
information of the CA port that
configures "Port_Group_xxx" is
displayed.
Refer to "Example 6" for display
example when clicking the
[Show...] link in the "Host" field
or the "CA Port" field.
All servers will be covered.
The server recognizes the
specified LUN group,
"LUN_Group_yyy", from every
member port in
"Port_Group_yyy".
In the CA port field, the location
information of the CA port that
configures "Port_Group_yyy" is
displayed.
The host affinity setting of
"Host_z (HBA)" and "LUN
Group_zzz" has been configured
to the device side CA port,
"CM#0 CA#0 Port#0".
Hosts, CA ports, and LUN groups
are allocated without specifying
a host group or CA port group.
The LUN mapping of
"LUN_Group_www" has been
configured to the device side CA
port, "CM#1 CA#1 Port#1".
Hosts, CA ports, and LUN groups
are allocated without specifying
a host group or CA port group.
P2X0-1260-19ENZ0