Fujitsu ETERNUS DX60 S3 User Manual page 244

Chapter 5 Connectivity Status
5.1 Connectivity (Basic Information)
Example
No.
Example –
5
Example Host_
6 Group_
xxx
Filter setting
Filter
Host Group
Host
CA Port Group
CA Port
LUN Group
Host Response
Virtual Volume
Display contents
Host Host CA Port
Group Group
All –
Host_1 Port_
Host_2 Group_
Host_3 xxx
Hide...
Input the host group name that is to be displayed.
When not using the host group name for filtering, leave this item blank.
Input the host name that is to be displayed.
When not using the host name for filtering, leave this item blank.
Input the CA port group name that is to be displayed.
When not using the CA port group name for filtering, leave this item blank.
Select the CA port name that is to be displayed.
Input the LUN group name that is to be displayed.
When not using the LUN group name for filtering, leave this item blank.
Select the host response name that is to be displayed.
Select the set state of the Virtual Volume function that is to be displayed.
This item is only displayed when "Enable" is selected for the Virtual Volume function.
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
CA Port LUN Host
Group Response
CM#0 – Host_
CA#1 Response5
Port#1
CM#0 LUN_ Host_
CA#0 Group_ Response1
Port#0 xxx
CM#1
CA#0
Port#0
Hide...
Description
244
Description
The LUN is directly allocated to
CA port "CM#0 CA#1 Port#1" by
an application other than
ETERNUS Web GUI (LUN
mapping is created).
Display example when the
[Show...] link for the "Host" field
or the "CA Port" field is clicked in
Example 1. In the host field, the
names of all the hosts that
configure "Host_Group_xxx" are
displayed. In the CA port field,
the location information of all
the CA ports that configure
"Port_Group_xxx" is displayed.
Refer to "Example 1" for display
example when clicking the
[Hide...] link in the "Host" field
or the "CA Port" field.
P2X0-1260-19ENZ0