Sas Port - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 5 Connectivity Status
5.3 CA Port Group
• Host Group
The name of the host group that has the host affinity setting with the target port is displayed.
If no host group with the host affinity setting exists, a "-" (hyphen) is displayed.
• Port Group
The name of the port group to which the target port belongs is displayed.
If the target port does not belong to a port group, a "-" (hyphen) is displayed.
• Host iSCSI Name
iSCSI names of all iSCSI hosts that have the host affinity setting with the target port are displayed.
If the host affinity setting is not configured, a "-" (hyphen) is displayed.
Filter setting
Filter
Port
Type
Status
Host Group
Port Group
Host iSCSI Name
5.3.3

SAS Port

Parameters of the SAS ports that are registered in the ETERNUS DX are displayed.
The ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8100 S3/DX8700 S3/DX8900 S3, the ETERNUS AF250/
AF650, and the ETERNUS DX200F do not support this function.
Select the location information of the port that is to be displayed.
Select the type of the port that is to be displayed.
Select the status of the port that is to be displayed.
Input the name of the host group that has the host affinity setting with the port that is
to be displayed.
When not using the host group name for filtering, leave this item blank.
Input the name of the port group to which the port that is to be displayed belongs.
When not using the port group name for filtering, leave this item blank.
Input the host iSCSI name of the iSCSI host that has the host affinity setting with the port
that is to be displayed.
When not using the host iSCSI name for filtering, leave this item blank.
263
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
Description
P2X0-1260-19ENZ0