Fujitsu ETERNUS DX60 S3 User Manual page 128

Chapter 3 Component Status
3.7 Controller Module Detail
The following items are displayed in the Main area:
• Location
The CM number is displayed.
• Status
The CM status is displayed. Refer to
In the Unified Storage environment, "
The CM status changes to "
generated.
• Memory Size
The cache memory capacity of the CM is displayed.
• Part Number
The port number of the CM is displayed.
• Serial Number
The serial number of the CM is displayed.
• Hardware Revision
The hardware version of the CM is displayed.
• MAC Address (MNT)
The MAC address of the MNT Port is displayed.
• MAC Address (RMT)
The MAC address of the RMT Port is displayed.
• MAC Address (FST)
The MAC address of the FST Port is displayed.
This item is displayed for the ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8100 S3/DX8700 S3/DX8900
S3, and the ETERNUS AF650.
• Active EC
The Edition Control (EC) number of the currently running firmware is displayed.
• Next EC
The EC number of the firmware that is to be run at the next power-on is displayed.
• CPU#n Clock
The clock frequency of CPU#0 or CPU#1 is displayed.
• CPU#n Status
The status of CPU#0 or CPU#1 is displayed. Refer to
• CPU#n Status Code
The status code of CPU#0 or CPU#1 is displayed.
• CPU#n Error Code
The error code of CPU#0 or CPU#1 is displayed.
"A.5 Component Status" (page 410)
Maintenance" is displayed until a NAS system volume is created.
Normal" after a NAS user volume is created and the NAS system volume is
128
ETERNUS Web GUI User's Guide (Operation)
Copyright 2016 FUJITSU LIMITED
for details.
"A.5 Component Status" (page 410) for details.
P2X0-1260-19ENZ0