Siemens Desigo RXB Technical Manual page 248

LTE-mode
communication objects
Note
HandyTool
HandyTool
Note
12/166
Siemens
Building Technologies
All communication objects which operate in LE-mode are described as follows:
Possible partner-
function blocks
HVACMode 1) 110 HVACS
HVAC-Mode Scheduler
Timeswitch zone 2)
104 PMC
Program to HVAC-Mode
Conversion
Key
1) Enter the name of the LTE communication object here.
2) Each LTE communication object is assigned to a zone.
This is recorded here.
3) This is where suitable partner-function blocks are listed. They are described in the
Konnex specification.
4) The devices listed here (manufacturer and type) are suitable partners for the
communication object.
For a list of all LTE mode communication objects, refer to section 13.6.
A detailed description of the Konnex data types in section 0.
The left margin contains the symbol for the HandyTool next to a table containing the
parameter number, short name and basic setting.
The number has syntax *xxx, with xxx being a three-digit number.
Parameter Short name
*027 Setpoint additional heating
A list of the parameters by number and in alphabetical order is located in sections 13.7
and 13.8.
A table of parameters with enumerations fort he HandyTool is shown in Section 13.9.
RXB (KNX) application library
Definitions / Tools
3)
FNC Description of functions for FC-10, FC-11, FC-12
Known partner devices
Siemens
Synco RM700
Basic setting
25.0°C
CM110385en_05
28 Feb 2009
4)