Supported Tools; Parameterization With Ets3 Professional - Siemens Desigo RXB Technical Manual

Important!
STOP
ETS3 Professional
Siemens
Building Technologies
2.2

Supported tools

The RXB Konnex controllers can be commissioned either with the Konnex tool ETS3
Professional, the Synco ACS Service too or the HandyTool.
• Be careful when using different tools. The following rule applies:
Last one's right!
• When you use an OCI700 as the interface, connect it to the controller's or room
unit's service socket.
The OCI700 must be powered via USB by the computer as long as it is
connected to the service socket. Otherwise, the LCD display for the room device
goes dark and the controller goes to addressing mode.
2.3

Parameterization with ETS3 Professional

This manual does not describe how physical addresses are defined.
Refer to the EIB manual for more details.
Open the project and select a device.
To start parameterization, select Edit, Edit parameters.
RXB (KNX) Applications library
Definitions / Tools
CLC and RAD description of functions for CC-02 CM110384en_03
11/140
28 Feb 2009