Working With Different Tools - Siemens Desigo RXB Technical Manual

Siemens
Building Technologies
15

Working with different tools

It is possible to prepare the RXB controllers in the office (parameterize in advance) so
that only the physical address has to be entered on site. To this end, the HandyTool
offers its "small parameterization".
In this case, preparatory work is probably carried out with ACS or ETS rather than the
HandyTool.
Special caution is required (data consistency) when using more than one tool.
First step
HandyTool
ACS
ETS
* An upload is necessary to avoid losing the data from Step 1.
** The ETS project is missing (no upload possible).
*** The ETS project is NOT updated.
RXB (KNX) Applications library
Working with different tools
Second step
HandyTool ACS
( ) *
X *** X ***
CLC and RAD description of functions for CC-02 CM110384en_03
ETS
X **
X **
139/140
28 Feb 2009