Siemens Desigo RXB Technical Manual page 261

ACS Professional
Reducing the bus load
HandyTool
Notes
Siemens
Building Technologies
The zones are defined under Communication.
Individual zones can also be disabled via "Command" if they are not being used. This
has the advantage of reducing the load on the bus.
See Parameters in the last column of the table below
Short description
Geographical zone (apartment)
Geographical zone (room)
Geographical zone (subzone)
Time switch zone (apartment)
Time switch zone (room)
Time switch zone (subzone)
Heat distr zone heating coil
Heat distr zone cooling coil
Heat distr zone heating surface
Outside temperature zone
• Value 0 means broadcast and is therefore prohibited.
• If in the Geogr. zone or in the Time switch zone one of the values is = –1, the entire
zone is "Out of service".
RXB (KNX) application library
Select communication mode
Basic setting
– 1 (out of service)
1
1
1
1
1
– 1 (out of service)
– 1 (out of service)
– 1 (out of service)
1
FNC Description of functions for FC-10, FC-11, FC-12
Parameter
*008
*009
*010
*011
*012
*013
*014
*015
*016
*018
25/166
CM110385en_05
28 Feb 2009