Migrating The Backup Data - NEC Univerge UM8000 Installation Manual

Issue No. 1.0
1.3
13 - 4
6.

Migrating the Backup Data

After the OS/2 backup data has been transferred to the UM8000 system, start
the migration.
To migrate the OS/2 data to the UM8000 database, perform the following
procedure:
1. Log into the Web Administration Console.
2. Go to System/Backup and Restore/Restore.
3. Use the browse icon to find the database to migrate on the support PC,
this can include mapped network drives.
4. Choose upload.
After uploading the database, it appears in the local backup list.
5. In the pull down menu for the uploaded database, choose restore.
6. When prompted, confirm to restore this database.
7. When the migration completes, you receive a message.
8. Go to Server Control.
9. Stop the voice messaging system.
10. After the application stops, choose to start the voice messaging system.
Where <filename> is the name of the compressed
backup file, for example backup.zip. If the file transfer
is successful, you should see the following message:
File send .
OK
NOTE
File names are case-sensitive when using FTP. If
you see the "Failed to open file" error message,
type dir
<ENTER>
To exit the FTP client, type quit <ENTER>.
Next steps...
Migrate the OS/2 data to the UM8000
◆
database. Refer to
Data on page 13-4.
UM8000
to view the correct file name.
1.3 Migrating the Backup
Database Migration