Backing Up A Dos Voice Messaging System; Backing Up The Dos Database - NEC Univerge UM8000 Installation Manual

UM8000
2.2
Installation Manual
4. Install the UM8000 blade.
5. Transfer the back up data from the support computer to the
UM8000 server.
6. Run the migration procedure on the voice messaging server.
Refer to Section
chapter.

Backing Up a DOS Voice Messaging System

The DOS Voice Messaging System data must be backed up before the data
can be migrated to the new voice messaging system. After the data is backed
up, it must be compressed before transferring the data to a support computer.
The following types of data can be included in the DOS backup:
Messages
Voice names
Greetings
Subscribers
System settings
Transaction boxes
Interview boxes
Groups
The following procedures assume that CoSession and the Backup and Restore
Utilities (BRU) are installed on the support computer running the Windows
operating system, and a direct connection has been established.
For more information about these applications or using a modem connection,
see the DOS voice messaging system documentation.
2.2.1

Backing Up the DOS Database

1. At the Windows support computer, start the CoSession Remote
client.
2. In the CoSession Remote Viewer Control Center, choose the
voice messaging system in the Name list box.
3. Click
Call
The voice messaging system Banner page appears.
4. Press
ESC
After the voice messaging system shuts down, the Utility menu
appears.
1.3 Migrating the Backup Data on page 13-4
.
to shut down the voice messaging system.
Issue No. 1.0
in this
13 - 13