Configuring Live Record On The Phone System - NEC Univerge UM8000 Installation Manual

Issue No. 1.0
While recording, a periodic beep is required by many local laws. To record from
ViewMail, program the phone system to provide the periodic beep. To record from the
phone set, configure the voice messaging system to provide the beep. The default is
15 seconds. Entering 0 (zero) disables the beep. For instructions on how to set up the
live record beep on the voice messaging system, see System Management Help.
CAUTION
4.1
8 - 8
The use of monitoring, recording or listening devices to eavesdrop, monitor, retrieve or
record phone conversations or other sound activities, whether or not contemporaneous
with transmission, may be illegal in certain circumstances under federal or state laws.
Legal advice should be sought prior to implementing any practice that monitors or
records any phone conversation. Some federal and state laws require some form of
notification to all parties to a phone conversation, such as using a beep tone or other
notification methods or requiring the consent of all parties to the phone conversation,
prior to monitoring or recording the phone conversation. Some of these laws
incorporate strict penalties.

Configuring Live Record on the Phone System

1. Enable the live record beep.
Command Code:
First Data:
Second Data:
2. Enable automatic live record systemwide, optional.
Command Code:
First Data:
Second Data:
NOTE
Automatic live record is supported only with release transfers.
08
109
0
08
141
0
Where 0 enables automatic live
record for systemwide and
1 disables automatic live record
systemwide.
Setting Up Integration (SV8300)
UM8000