Changing Administrator Password And Creating A New User; Changing The Password; Creating A New User - NEC Univerge UM8000 Installation Manual

Issue No. 1.0
5.4
9 - 14

Changing Administrator Password and Creating a New User

5.4.1

Changing the Password

To change admin password, use the following procedure.
1. Start PuTTY.
2. Log in as Admin <ENTER> .
3. On the Main menu, choose
The Maintenance page appears.
4. On the Maintenance menu, choose
press <ENTER> .
The Set admin password page appears.
5. Type the new password, then press <ENTER> .
Retype the new password., then press <ENTER> .
6.
An alert message appears stating that the password has been
changed.
Click OK or press <ENTER> to return to the Maintenance menu.
7.
8. On the Maintenance menu, choose
press <ENTER> to return to the Main menu.
5.4.2

Creating a New User

To create a new system manager for the voice messaging system,
perform the following procedure:
1. Start the Web administration console.
2. Under
The Subscriber profile page appears.
3. Click the Add icon to create a new subscriber.
The Add subscriber page appears.
4. Make sure that the
Click Add .
5.
The Add subscriber page resets. Close the page.
6. On the Subscriber profile page, choose the
system manager
7. Click the Save icon.
8. The new subscriber now has system manager permissions.
2-Maintenance
, click Subscribers .
Subscribers
New subscriber
check box.
, then press <ENTER> .
2-Set admin password
0-Return to previous menu
check box is checked.
Enable subscriber as
Configuring UM8000
UM8000
, then
, then