Converting Existing Domino E-Mail Files For Users; Converting Existing E-Mail Files - NEC Univerge UM8000 Installation Manual

Issue No. 1.0
4.2
C
S 5
ONFIGURING THE
ECTION
The e-mail server must be configured and connected to the voice messaging system
before subscribers can use the e-mail integration.
The following e-mail server information is required to establish communications with
the voice messaging system server:
10 - 4

Converting Existing Domino E-mail Files for Users

Set an Internet password for all existing users before converting any existing
e-mail files. Use the following procedure to convert user e-mail files.
4.2.1

Converting Existing E-mail Files

1. Log on to the Domino e-mail server as root user.
2. On the Windows taskbar, click Start > Programs > Lotus
Application > Lotus Domino Administration.
3. Type the Domino password.
The Domino Administrator console appears.
4. Click Console to open the Domino server command prompt.
The command prompt appears. Use one of the following set of
commands to convert existing e-mail:
To convert a single user, type the following commands:
■
Where <
steps for each user to be converted.
To convert all users in a directory, type the following
■
commands:
5. Close the Domino Administrator.
6. Log off the Domino server.
The Domino server is now configured for e-mail integration.
V
OICE
The IP address or exact name of the SMTP server.
The SMTP port number.
tell router quit
load convert -e mail\<mailfilename>.nsf
load convert -h mail\<mailfilename>.nsf
load router
mailfilename
> is the name of the user, follow these
tell router quit
load convert -e mail\*.nsf
load convert -h mail\*.nsf
load router
M
ESSAGING
S
YSTEM
E-mail Integration
UM8000