Configuring Live Record On A Subscriber's Extension - NEC Univerge UM8000 Installation Manual

UM8000
4.2
Installation Manual
3. Enable automatic live record for trunk calls, optional.
Command Code:
First Data:
Second Data:

Configuring Live Record on a Subscriber's Extension

Do this procedure for each subscriber extension that will use live record.
1. Enable message waiting service for the extension.
Command Code:
First Data:
Second Data:
2. Set the Prime Line for the extension.
Command Code:
First Data:
Second Data:
3. Assign live record line key functions.
Command Code:
First Data:
Second Data:
3522
xx
Where <xx> is the trunk route
number.
0
Where 0 enables automatic live
record for systemwide and
1 disables automatic live record
systemwide.
1303
xxx
Where <xxx> is the subscriber's
extension number.
0
93
xxx
Where <xxx> is the subscriber's
extension number.
xxx
Where <xxx> is the subscriber's
extension number.
9000
xxx, yyy
Where <xxx> is the subscriber's
extension number and
<yyy> is the line key.
F1091
Where F1091 = Record.
Issue No. 1.0
8 - 9