Configuring Um8000; Overview; Starting The Um8000 For The First Time - NEC Univerge UM8000 Installation Manual

Configuring UM8000

O
S 1
VERVIEW
ECTION
Once the UM8000 blade has been installed, the next step is to configure
the voice messaging system and the SV8100/SV8300 phone system to
communicate with each other.
S
S 2
TARTING THE
ECTION
To start the UM8000 for the first time, make the required settings and
license agreements before starting the application. To access settings
options and license agreements, connect to the Web Administration
Console (WAC) using an internet browser.
If the license agreements are not accepted, the application cannot start.
NOTE
The following procedure provides instructions for starting the UM8000 for
the first time:
1.
2.
3.
Installation Manual
UM8000
If the voice mail database is defaulted, this procedure must be repeated.
First determine the IP address of the voice mail by checking program
10-55-01 for the slot where the blade is installed.
Start your internet browser and enter the IP address followed by
/admin in the URL window.
For example: 172.16.0.100/admin.
Press <ENTER>.
F T
FOR THE IRST IME
9
9 - 1