Windows Nt, 2000 Or Xp Setup - NEC Univerge UM8000 Installation Manual

UM8000
Installation Manual
1.5.1

Windows NT, 2000 or XP Setup

To configure Windows 2000, Windows NT, or Windows XP for remote
backup, perform the following procedure:
1.5.1.1 Setting Up an NT, 2000 or XP Workgroup
1.
2.
3.
4.
5.
6.
1.5.1.2 Setting Up an NT or 2000 User ID and Password
1.
2.
3.
4.
5.
Log on to the Windows NT or 2000 computer with
administration access rights.
Right-click the My Computer icon, then select the
.
Properties
On the Network Identification tab, confirm that the
computer name is all one word with no spaces.
Click , then type a unique Workgroup name
Properties
that is different from any domain on the network.
Write down the computer name and Workgroup
name. This information is required to set up an OS/2
voice messaging system.
Click .
OK
Set up new accounts, use the operating system
documentation to set up new accounts.
Alternatively, if you want the NEAXMail IM-16 OS/2
system to use the default Guest account, enable the
single user Guest account and confirm that the Guest
password is set.
Confirm that the single user Guest account for this
step is being used. This is different from the Guests
group account.
For either the Guest or new account, clear the check
box for the User must change password on the next
log on field.
Write down the account user ID and password. You
need these values to set up NEAXMail IM-16 OS/2.
Click , then click
Apply
Issue No. 1.0
to complete the setup.
Close
13 - 11