NEC Univerge UM8000 Installation Manual page 113

UM8000
Installation Manual
22. Type 5 then <ENTER>.
23. Type the correct value for the Name Server field, then
<ENTER>.
The NetBIOS over TCP/IP Setup menu appears.
24. Type 1 then <ENTER>.
25. In the Workstation Name field, type the Windows
logon name of the voice messaging system, then
<ENTER>.
26. Type 2 then <ENTER>.
27. In the NT Domain Name field, type the Windows
domain name of the voice messaging system, then
<ENTER>.
NOTE
If there is no Windows domain, type the Windows
workgroup name instead.
28. Type 3 then <ENTER>.
29. In the Workstation Description field, type a
description for the voice messaging system, then
<ENTER>.
30. Review the entries to confirm that they are correct,
then <ENTER> to continue.
Setup configures the network protocols according to
the information provided.
31. When the configuration is complete, the Setup
Complete menu appears. Press <ENTER> to exit the
setup utility.
32. Shut down the OS/2 voice messaging system blade
by moving the Shutdown Switch to the
33. After the system has fully shut down, move the
Shutdown Switch back to the
click the Reset button to restart the system.
Issue No. 1.0
position.
UP
position then
DOWN
13 - 7