Issue No. 1.0
Next step...
◆
10 - 6
5.
Construct the notification template as needed. The tags below can be
used to insert information that the voice mail system dynamically
determines for each message.
[senderName]
●
[senderPhone]
●
[senderAccount]
●
[messageTimestamp]
●
[messageDuration]
●
[messageSize]
●
[messageFlag]
●
[voicemailURL]
●
[subscriberName]
●
[subscriberExtension]
●
[notificationType]
●
6.
Click the Save icon.
7.
Click Preview.
The voice messaging system e-mail configuration is complete.
Configure subscriber template e-mail settings. Refer to Section
Up the Default Subscriber Template on page 10-7
Sender's name
●
Sender's phone
●
Sender's account (only available if
●
configured in subscriber transfer/
screening options)
Message received timestamp on
●
the messaging system
Message length in seconds
●
Message size in kilobytes
●
Message Special flags. Available
●
message flags: PRIVATE and
URGENT
URL of the messaging system
●
Subscriber's name
●
Subscriber's extension
●
Message notification type. Available
●
notification types: voice, fax,
message copy, forwarded voice,
forwarded fax, forwarded fax with
voice, reply fax, reply voice and IM
in this chapter.
UM8000
6.1 Setting
E-mail Integration