Using Putty - NEC Univerge UM8000 Installation Manual

UM8000
3.3
Installation Manual
warning message does not appear for subsequent connections. Click Yes.
After the client connects to the voice board, the login prompt appears:
Logging On and Logging Off Using PuTTY. Refer to Section
On and Logging Off Using PuTTY on page

Using PuTTY

The following procedures assume that PuTTy is installed on a computer
running the Windows XP operating system and you are using a keyboard and
mouse as input devices.
Use PuTTY for remote SSH terminal access.
To run PuTTY, perform the following procedure:
1. Click Start > Programs > PuTTY > PuTTY.
The PuTTY Configuration window appears.
2. Type the
Host Name
NOTE
The IP address for the voice mail is assigned in chassis programming
10-55-xx. At default this address is 172.16.1.xxx, where .xxx is the slot
where the CD-VM00 is installed. (Slot 1 is .100, slot 2 is .101, slot 5 is
.104, and so on.)
The shell appears with a login prompt.
3. Type a user name, admin <ENTER>.
4. Type the password at the password prompt, voicemail <ENTER>.
The Maintenance menu appears.
or , then press <ENTER>.
IP address
Issue No. 1.0
3.3 Logging
11-4.
2 - 5