NEC Univerge UM8000 Installation Manual page 115

UM8000
Installation Manual
3. In the Multi-Protocol Transport Services dialog box,
click
4. In the Configure dialog box, click
Protocols
Protocol Configuration dialog box appears.
5. In Current Configuration click
TCP/IP
6. Click
7. Make sure the IP address listed in the broadcast list
is the correct IP address of the Primary Domain
Controller (PDC) for the Windows domain.
Consult with your network administrator to determine
the correct PDC IP address.
8. Click
9. Click
10. Click
Services application.
11. Double-click the
restart OS/2.
1.4.2.4 Logging On to the Windows Domain or Workgroup Using
NetBIOS
1. On the voice messaging system, go to an OS/2
command prompt.
2. The command options used depend on if you are
logging on to a domain or a workgroup:
Domain
Workgroup
.
Configure
, then click
Configure
, then click .
Edit
, then click
Broadcast list
to apply the change.
OK
to close the Configure dialog box.
Close
to close the Multi-Protocol Transport
Exit
Shutdown
Type:
logon <userid> /p:<password>
/d:<domain> <ENTER>
Where
user id Windows user name
=
password
= Windows password
domain Windows domain name
=
Type:
logon <userid> /p:<password>
<ENTER>
Where
userid
Windows user name
=
password Windows password
=
Issue No. 1.0
LAN Adapters and
. The Adapter and
IBM OS/2 NetBIOS over
.
Configure
icon on the desktop to
13 - 9