Configuring Live Record On Um8000 - NEC Univerge UM8000 Installation Manual

Issue No. 1.0
4.3
8 - 10
4. Enable automatic live record for the extension, if the subscriber wants it.
Command Code:
First Data:
Second Data:

Configuring Live Record on UM8000

By default, live record is disabled for subscribers in the default subscriber
template and the maximum recording time for live record is 300 seconds, or five
minutes. Use the following procedure to change the default settings.
1. Log on to the Web administration console, then go to Subscribers >
Subscriber Template > Live Record.
2. Select Enable live record.
3. In the Maximum record time field, specify the recording time in seconds.
4. Click Save.
5. If necessary, enable live record for any previously existing subscribers.
The template change only affects new subscribers added to the
messaging system.
1323
xxx
Where <xxx> is the subscriber's
extension number.
0
Where 0 enables automatic live
record for the extension and
1 disables automatic live record for
the extension.
Setting Up Integration (SV8300)
UM8000