Setting Up Subscriber Mailboxes; Setting Up The Default Subscriber Template; Setting Subscriber E-Mail Options - NEC Univerge UM8000 Installation Manual

UM8000
S
S 6
ETTING
ECTION
After configuring the voice messaging system server and the e-mail server for e-mail
integration, set up subscribers to access e-mail messages using the phone.
6.1
6.2
Installation Manual
U S
P UBSCRIBER

Setting Up the Default Subscriber Template

Configure the subscriber template for access to e-mail. The subscriber template
is used to pre-configure new subscriber settings. Any existing subscribers must
be configured individually.
To set up the default subscriber template, perform the following procedure:
1. Start the voice messaging system.
2. Start the Web administration console.
3. Under Subscribers, click Subscriber Template > E-Mail.
4. In the Server type field, choose IMAP or POP3.
5. In the Server name field, type the IP address for the voice messaging
system.
Choose authentication method Plaintext or NTLM.
6. If appropriate, make sure the Use SSL check box is checked, for SSL
authentication.
7. When the SSL check box is checked, the port number 993 appears in the
field.
8. In the Port field, type 143 for IMAP; 110 for POP3; or the appropriate
value for the e-mail server.
NOTE
For subscriber e-mail integration to work, the subscriber must have
appropriate access options. Access to e-mail messages from voice mail
or fax/voice e-mail forwarding or notification.
9. Click the Save icon.

Setting Subscriber E-mail Options

Use the following procedure to change individual subscriber e-mail settings.
To set subscriber e-mail access options:
1. Start the Web administration console.
2. In the Subscribers section, click Subscriber Template > E-Mail.
3. Select a subscriber.
Use the Next, Previous, or Find Subscriber icons to locate a subscriber
profile. The subscriber profile is displayed.
M
AILBOXES
Issue No. 1.0
10 - 7