10/100 Base-Tx Ethernet Interface - NEC Univerge UM8000 Installation Manual

Issue No. 1.0
5.4
6 - 8

10/100 BASE-TX Ethernet Interface

The APSU card provides a 10/100 Ethernet interface through an RJ-45
connector. Some possible uses for the Ethernet port are the following:
Unified Messaging (Email)
Software Update
Application Configuration
Text to Speech and Speech Recognition using an external server
Network Attached Storage (NAS)
The Via VT6107 Ethernet controller shall be used. It interfaces to the CPU over
a 33 MHz PCI bus and connects directly to an Ethernet RJ-45 connector with
built-in magnetic and LEDs. The RJ-45 connector pin-out is shown in
Ethernet Connector Pin-Out on page
Table 6-2 Ethernet Connector Pin-Out
View
PIN1 ---- PIN8
1 8
6-8.
Pin No. Signal
1 Tx+
2 Tx-
3 Rx+
4 NC
5 NC
6 Rx-
7 NC
8 NC
UM8000
Table 6-2
Note
10BASE-T/100BASE-TX port
(RJ-45 connector)
Hardware