Siemens SITRANS P Brochure & Specs page 11

■
Selection and Ordering data
SITRANS P pressure transmitters for pressure, series Z for pressure and absolute pressure
2 or 3-wire system, rising characteristic curve
Process connection
G½" male to EN 837-1 (½" BSP male) (standard for metric pressure ranges mbar, bar)
G½" male thread and G1/8" female thread
G¼" male to EN837-1 (¼" BSP male)
7/16"-20 UNF male
¼"-18 NPT male (standard for pressure ranges psi)
¼"-18 NPT female
½"-14 NPT male
½"-14 NPT female
RC ½" male to JIS B 7505
G1" male (only for measuring ranges ≥ 1 bar g (14.5 psi g)) and max. permissible working pressure
100 bar g (1450 psi g)
Special version (specify Order code and plain text)
Sealing material between sensor and housing
Viton (standard)
Neoprene
Perbunan
Special version (specify Order code and plain text)
Further designs
Quality inspection certificate (Factory calibration) to IEC 60770-2,
add "-Z" to Order No. and Order code.
Oxygen version, oil and grease-free cleaning (only if the sealing material between sensor and housing is
Viton and only for measuring ranges ≥ 1 bar g (≥ 14.5 psi g)
and ≥ 1 bar a (≥ 14.5 psi a)
Accessories
Quality inspection certificate (Factory calibration) to IEC 60770-2 supplied later,
specify factory no. of transmitter.
}
Available ex stock
© Siemens AG 2008
SITRANS P measuring instruments for pressure
Transmitters for gage, absolute and differential pressure
D) Subject to export regulations AL: N, ECCN: EAR99H.
Z series for gage and absolute pressure
Order No.
7 MF 1 5 6 4 -
7 7 7 7 7
D)
}
}
Order code / Order No.
C11
E10
Order No.
D) 7MF1564-8CC11
Siemens FI 01 · 2009
Order code
- 1
7 7 7 7 7 7
2
A
B
C
D
E
F
G
H
K
M
Z P 1 Y
A
B
C
Z Q 1 Y
2/11