Siemens SITRANS P Brochure & Specs page 130

SITRANS P measuring instruments for pressure
Transmitters for gage, absolute and differential pressure, flow and level
DS III series
for level
Selection and Ordering data
Additional data
Add "-Z" to Order No. and
specify Order code.
2 Measuring range to be set
Specify in plain text (max. 5 digits):
Y01: ... up to ... mbar, bar, kPa, MPa, psi
Measuring point number (TAG No.)
Max. 16 characters, specify in plain text:
Y15: ...........................................
Measuring point text
Max. 27 characters, specify in plain text:
Y16: ...........................................
Entry of HART address (TAG)
Max. 8 characters, specify in plain text:
Y17: ...........................................
Setting of pressure indicator in pressure
units
Specify in plain text (standard setting: mA):
Y21: mbar, bar, kPa, MPa, psi, ...
Note:
The following pressure units can be selected:
*)
bar, mbar, mm H O , inH
2
mmHG, inHG, psi, Pa, kPa, MPa, g/cm
2
kg/cm , Torr, ATM or %
*) ref. temperature 20 °C
Setting of pressure indicator in
non-pressure units
Specify in plain text:
Y22: ..... up to ..... l/min, m
(specification of measuring range in
pressure units "Y01" is essential, unit with
max. 5 characters)
Preset bus address
(possible between 1 and 126)
Specify in plain text:
Y25: .....................
Only "Y01", "Y21", "Y22", "Y25" and "D05" can be factory preset
9 9 = available
1)
Not together with over-filling safety device for flammable and
non-flammable liquids (Order code "E08")
2/130 Siemens FI 01 · 2009
Order code
HART PA
9 9
Y01
9 9
Y15
9 9
Y16
9 9
Y17
9 9
Y21
*) *)
O , ftH O ,
2 2
2
,
1) 9 9
Y22
+ Y01
3
/h, m, USgpm, ...
Y25
© Siemens AG 2008
Selection and Ordering data
FF Mounting flange
Directly mounted on the
SITRANS P pressure transmitter (converter part)
for level, for DS III series
Connection acc. to EN 1092-1
Nom. diam.
DN 80
9 9 9 9
DN 100
9 9 9 9
Connection acc. to ASME B16.5
Nom. diam.
3 inch
4 inch
Other version, add
9 9 9 9
Order code and plain text:
Nominal diameter: ...; Nominal pressure: ...
Wetted parts materials
• Stainless steel 316L
- Coated with PFA
- Coated with PTFE
- Coated with ECTFE
• Monel 400, mat. No. 2.4360
• Hastelloy B2, mat. No. 2.4617
• Hastelloy C276, mat. No. 2.4819
• Hastelloy C4, mat. No. 2.4610
• Tantalum
Other version, add
Order code and plain text:
material of parts in contact with the medium: ...
Sealing face, see "Technical specifications"
9 9
Tube length
• Without
• 50 mm
• 100 mm
• 150 mm
• 200 mm
Other version: add
Order code and plain text:
Tube length: ...
Filling liquid
• Silicone oil M5
• Silicone oil M50
• High-temperature oil
• Halocarbon oil (for O
2)
• Glycerin / water
• Food oil (FDA-listed)
Other version, add
Order code and plain text:
filling liquid: ...
1)
For vacuum on request
2)
Not suitable for use in low-pressure range
Order No.Ord. code
7 M F 4 9 1 2 -
3
7 7 7 7
Nom. press.
D
PN 40
G
PN 16
H
PN 40
Nom. press.
Q
Class 150
R
Class 300
T
Class 150
U
Class 300
Z
A
D
E 0
1)
F
G
H
U
K
Z
(1.97 inch)
(3.94 inch)
(5.90 inch)
(7.87 inch)
measurements)
2
7 7 7
J 1 Y
J
K 1 Y
0
1
2
3
4
9 L 1 Y
1
2
3
4
6
7
9 M 1 Y