Siemens SITRANS P Brochure & Specs page 115

Transmitters for gage, absolute and differential pressure, flow and level
Selection and Ordering data
Additional data
Add "-Z" to Order No. and specify Order code.
Measuring range to be set
Specify in plain text:
• With linear characteristic (max. 5 digits):
Y01: ... up to ... mbar, bar, kPa, MPa, psi
• With square-rooted characteristic (max. 5
digits):
Y02: ... up to ... mbar, bar, kPa, MPa, psi
Measuring point number (TAG No.)
Max. 16 char., specify in plain text: Y15: .......
Measuring point text
Max. 27 char., specify in plain text: Y16: .......
Entry of HART address (TAG)
Max. 8 char., specify in plain text: Y17: .......
Setting of pressure indicator in pressure
units
Specify in plain text (standard setting: mA):
Y21: mbar, bar, kPa, MPa, psi, ...
Note:
The following pressure units can be selected:
*) *)
bar, mbar, mm H O , inH O , ftH
2 2 2
mmHG, inHG, psi, Pa, kPa, MPa, g/cm
2
kg/cm , Torr, ATM oder %
*) ref. temperature 20 °C
Setting of pressure indicator in
non-pressure units
Specify in plain text:
3
Y22: ..... up to ..... l/min, m /h, m, USgpm, ...
(specification of measuring range in pressure
units "Y01" or "Y02" is essential, unit with
max. 5 characters)
Preset bus address
(possible between 1 and 126)
Specify in plain text:
Y25: .....................
Only "Y01", "Y21", "Y22", "Y25" and "D05" can be factory preset
9 9 = available
1)
Not together with over-filling safety device for flammable and
non-flammable liquids (Order code "E08")
© Siemens AG 2008
SITRANS P measuring instruments for pressure
Order code
HART PA FF
9 9
Y01
9 9
Y02
9 9 9 9
Y15
9 9 9 9
Y16
9 9
Y17
9 9 9 9
Y21
*)
O ,
2
,
1) 9 9
Y22
+
Y01 or
Y02
9 9
Y25
9 9
9 9
9 9
DS III series
for differential pressure and flow
Siemens FI 01 · 2009
2
2/115