Siemens SITRANS P Brochure & Specs page 187

s
* Customer:___________________
* Plant: ___________________
* Ordering code:________________ Person responsible: ___________
* Ordering department: _____
* Transmitter Order No.: 7MF 4
* Order No. of remote seal:
* 7MF 4 9 –
Suffixes _______________________
Suffixes _______________________
No
* Range to be set:
* (without calculation)
Start-of-scale: _________ mbar ( 4 mA)
Full-scale: _________ mbar (20 mA)
* Required measuring accuracy:
< . %
Error: _________ of set span per
: _________
: _________
Please fill in this questionnaire
and enclose with every order!
Checked: Name:
Department:
Date:
© Siemens AG 2008
Checking of transmitter/remote seal combinations
Order No. of transmitter known?
Yes
– –Z
Calculation of measuring range necessary?
* Medium ____________________________
* Density of medium: _______
* Temperature of medium:
* Ambient temperature on capillaries:
10 V change in
temperature
* Ambient temperature on transmitter:
* Operating pressure referred to absolute zero: ____ bar a
* Does a vacuum occur during startup?
If yes, associated temperature of medium:
* Installation type, see pages 2/183 and 2/184
* Measuring: With install. types A, B, C
range
* Dimensions: With install. types A, B, C
* Start-of-scale value following calculation:_________ mbar ( 4 mA)
* Full-scale value following calculation:_________ mbar (20 mA)
* Associated span:
* Error to be expected:
*) Values must be entered here!
Tag. No.: _____________________
Item No.: _____________________
Phone: _____________________
–1 –1
* Or without Order No.: Process connection
* Standard:
* Nominal diameter:
* Nominal pressure:
* Constructional design:
* Connection:
* Vacuum-proof design
* Wetted parts materials:
* Tube:
* Filling liquid
* Miscellaneous
With install. types A, B, G, H and J: H
With install. types D, G, H and J:
_________ mbar
_________ of set span per 10 K < .
_________
Questionnaire
No
________________________
________________________
________________________
Sandwich-type rem. seal
Flanged remote seal
Quick-release
remote seal
Clamp-on seal
Other.: ______________
Direct connection
Capillary on one side;
connection to:
+ side
Capillaries on both sides;
Capillary length: ___ m
Yes No
________________________
No Yes, ___mm long
________________________
________________________
Yes
3
kg/m
Normal ________ °C
Minimum ________ °C
Maximum________ °C
Normal ________ °C
Minimum ________ °C
Maximum________ °C
Normal ________ °C
Minimum ________ °C
Maximum________ °C
No Yes
________ °C
C C
A B
1 2
E G H J
, C and D: from ___ to ___ mbar
1 2
= ___ mm; H = ___ mm
U O
and C : H = ___ mm
1 2 1
H = ___ mm
V
%
change in temperature
Siemens FI 01 · 2009
2
– side
D
2/187