Siemens SITRANS P Brochure & Specs page 217

Selection and Ordering data
1)
Further designs
Please add "-Z" to Order No. and
specify Order code.
Accessory set to DIN
(connection between valve manifold
and pressure transmitter)
for valve manifold 7MF9412–1C.
2x screws M10x50 to DIN EN 24014;
chromized steel
2x washers Ø 10.5 mm to DIN 125;
1x O-ring to DIN 3771,
20 x 2.65 - S - FPM90, max. permiss-
2)
ble 420 bar, 120 °C
2x screws M10x50 to DIN EN 24014;
chromized steel
2x washers Ø 10.5 mm to DIN 125;
1x gasket made of PTFE,
2)
max. permissible 420 bar, 80 °C
for valve manifold 7MF9412–1D and
-1E.
4x screws M10x50 to DIN EN 24014;
chromized steel
4x washers Ø 10.5 mm to DIN 125;
2x O-rings to DIN 3771,
20 x 2.65 - S - FPM90, max. permiss-
2)
ble 420 bar, 120 °C
4x screws M10x50 to DIN EN 24014;
chromized steel
4x washers Ø 10.5 mm to DIN 125;
2x flat gaskets made of PTFE,
2)
max. permissible 420 bar, 80 °C
Mounting bracket
required for wall mounting or for
securing to mounting rack, with bolts
for mounting on valve manifold
• for valve manifolds 7MF9412-1B.
and -1C.
• for valve manifold 7MF9412-1D.
• for valve manifold 7MF9412-1E.
Mounting clip
2 off, to secure mounting bracket
to pipe
Valve manifold 100 bar
suitable for oxygen
• for valve manifolds 7MF9412-1B.
and -1C.
• for valve manifold 7MF9412-1D.
• for valve manifold 7MF9412-1E.
1)
When ordering accessory set or mounting together with the valve
manifolds, please use Order code; otherwise use Order No.
2)
Flange connections with M10 screws only permissible up to PN 160!
© Siemens AG 2008
SITRANS P measuring instruments for pressure
Fitttings - Shut-off valves for differential pressure transmitters
■
Order code Order No.
F12 7MF9412-6AA
F15 7MF9412-6BA
F14 7MF9412-6EA
F16 7MF9412-6FA
M14 7MF9006-6LA
M17 7MF9006-6NA
M18 7MF9006-6PA
M16
7MF9006-6KA
S12
S13
S14 ■
2-, 3- and 5-spindle valve manifolds
for installing in protective boxes
Accessories
Accessory set for 2-, 3- and 5-spindle valve manifolds (Con-
nection between manifold and transmitter)
2-spindle valve manifold DN 5 with flange connection
• F32: 2 screws 7/16 20 UNF x 2 inch to ASME B 18.2.1,
1 O Ring (FPM90)
• F35: 2 screws 7/16 20 UNF x 2 inch to ASME B 18.2.1,
1 flat-gasket
• F12: 2 screws M10x50 to DIN EN 24014, 2 washers,
1 O-ring (FPM90)
• F15: 2 screws M10x50 toDIN EN 24014, 2 washers,
1 flat gasket
3-spindle and 5-way valve manifold DN 5
• F34: 4 screws 7/16 20 UNF x 2 inch toASME B 18.2.1,
2 O-rings (FPM90)
• F36: 4 screws 7/16 20 UNF x 2 inch toASME B 18.2.1,
2 flat-gaskets
• F14: 4 screws M10x50 toDIN EN 24014, 4 washers,
2 O-rings (FPM90)
• F16: 4 screws M10x50 toDIN EN 24014, 4 washers,
2 flat-gaskets
Washers Ø 10,5 to DIN 125
Flat-gaskets made of PTFE, max. 420 bar, 80 °C
O-ring to DIN 3771, 20 x 2,65 - S - FPM90; max.420 bar, 120 °C
Note:
Flange connections with M10 screws only permissible up to
PN 160!
Mounting bracket for wall mounting or for securing to
mounting rack
With bolds for mounting on valve manifold
• M14: For 2-spindle valve manifold DN 5
• M17: For 3-spindle valve manifold DN 5
• M18: For 5-spindle valve manifold DN 5
Mounting clips (2 off)
• M16: For securing the mounting brackets M14, M17 and M18
to pipe
Valve manifold 100 bar, suitable for oxygen
• S12: For 2-spindle valve manifold DN 5
• S13: For 3-spindle valve manifold DN 5
• S14: For 5-spindle valve manifold DN 5
Characteristic curves
Permissible operating pressure as a function of the permissible operating
temperature
Siemens FI 01 · 2009 2/217
2