Huawei NetCol5000-A User Manual page 128

NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm)
----End
4.5 FAQ
4.5.1 How to Perform Quick Settings
Context


Procedure
Step 1 Choose Settings > Quick Settings on the home screen. The quick settings screen is displayed,
as shown by (1), (2), (3) and (4) in
----End
Issue 13 (2019-01-15)
b. Flip the fourth toggle switch to ON and others remain unchanged, the screen
calibration function is triggered.
After 15 seconds, a dialog box indicating Are you sure you want to calibrate the
screen? If you do not click Yes or No, calibration will start automatically 10
seconds later. is displayed, as shown in
Figure 4-46 Confirming to calibrate the screen
c. Wait for 10 seconds or tap Yes.
Figure 4-45 is displayed, the adjustment is complete.
d. Flip toggle switch 1 for the LCD to ON, and others to the opposite position.
You need to manually operate the operation again from
after the calibration failure.
On the quick settings screen, you can set the language, time, date, and system.
The Guest user can perform quick settings only during the initial power-on. If you need
to perform quick settings in other scenarios, log in as the Admin, Engineer, or
Operator user.
Copyright © Huawei Technologies Co., Ltd.
Figure 4-46.
Figure 4-44 is displayed. Tap the screen. When
a to trigger the touchscreen calibration function
Figure 4-3.
4 ACC Introduction
119