Huawei NetCol5000-A User Manual page 139

NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm)
4.5.12 Rectifying Faults of the E-label Identification Board
Context
If strong electromagnetic interference exists, the E-label identification board is abnormal, or
the E-label identification board is not properly connected, an exception may occur during
E-label identification.


Procedure
Step 1 Check whether strong electromagnetic interference exists around the E-label identification
board.

Issue 13 (2019-01-15)
If the information shown in
cooling product can run properly. To remove this tip, perform
Figure 4-57 Message 1
If the information shown in
cooling product cannot run properly. Perform
Figure 4-58 Message 2
In the Figure 4-58 the ACC V100R001C20SPC300 version is used as an example to describe the WebUI
prompt messages. During actual operations, the version in use prevails.
If yes, contact Huawei technical support.
Copyright © Huawei Technologies Co., Ltd.
Figure 4-57 is displayed on the controller LCD, the smart
Figure 4-58 is displayed on the controller LCD, the smart
Step 2
4 ACC Introduction
Step 1.
and subsequent steps.
130