Mitsubishi Electric C80 Series Connection And Set Up Manual page 197

C80 Series Connection and Setup Manual
11 CNC CPU Initial Setup
(b) Device setting of NC2
(Note)
(b-1) Perform the device setting on CPU1 side of NC2.
CPU1 (PLC CPU side): Setting example of three units of CNC CPU, 2-part system and 8 control
axes
(b-2) Perform the device setting on CPU2 side of NC2.
Press [Next CPU] at the bottom right. Confirm that [CPU2] is displayed in the top right.
CPU2 (CNC CPU side): Setting example of three units of CNC CPU, 2-part system and 8 control
axes
IB-1501452-C
When the [Execute init.] menu is pressed at NC2, the settings for (b-1) to (b-4) are performed
automatically.
166