Rq Extension Base Unit - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
4 General Specifications

4.2.3 RQ Extension Base Unit

7.5
44.1
n
W
WS1
WS2
WS1+WS2
No. Name
(1) Extension cable connector (IN)
(2) Extension cable connector (OUT)
(3) Extension connector cover
(4) Module connector
(5) Module fixing hole
(6) Base unit installation hole
(7) DIN rail adapter mounting hole
(8) Production information marking
IB-1501452-C
(6) n - M4x14
(1)(3) (5)
(2)
(8)
15.5 WS1
(7)
RQ65B RQ68B RQ612B
4 5
245 328 439
- 190±0.3 190±0.3
- 116±0.3 227±0.3
222.5±0.3 -
[mm]
A connector for connecting to a MELSEC iQ-R series base unit (upper level). A MELSEC
iQ-R series extension cable is connected here.
A connector for connecting to a MELSEC-Q series base unit (lower level). A MELSEC-Q
series extension cable is connected here.
When no cable is connected, attach the supplied extension connector cover to prevent
entry of foreign matter such as dust.
A protective cover for the extension cable connector.
A connector for mounting the MELSEC-Q series unit. The CPU module cannot be
mounted on the extension base unit.
Attach the supplied connector cover or the blank cover module (QG60) to the connector(s)
where no module is mounted to prevent entry of foreign matter such as dust.
A screw hole to fix a module to the base unit. (M3×12 screw)
A hole to install a base unit to a control panel. (M4 screw)
A hole to mount a DIN rail adapter.
Shows the production information (16 digits) of the module.
(4)
W
5
-
Description
28
[mm]
WS2