Mitsubishi Electric C80 Series Connection And Set Up Manual page 58

C80 Series Connection and Setup Manual
4 General Specifications
(2) Q63B/Q65B/Q68B/Q612B/Q52B/Q55B
(2)
(1)
7.5
n
W
WS1
WS2
WS3
WS4
H
HS1
HS2
No. Name
(1) Extension cable connector
(2) Base cover
(3) Module connector
(4) Module fixing screw hole
(5) Base fixing hole
(5)
M4 x n
WS2
WS1
Q63B Q65B
4 4
189 245
- - 190±0.3
- - 116±0.3
167±0.3 222.5±0.3
[mm]
Connector to which the extension cables are connected for sending and receiving
signals from the extension base unit.
Protective cover of extension cable connector. Before an extension cable is
connected, the area of the base cover surrounded by the groove under the word
"OUT" on the base cover must be removed with a tool such as nippers.
Connector for installing the Q series power supply module, CPU module, I/O
modules, and intelligent function module.
Attach the supplied connector cover or the blank cover module (QG60) to the
connector(s) where no module is mounted to prevent entry of foreign matter such
as dust.
Screw hole for fixing the module to the base unit. Screw size: M3x12
Hole for fixing this base unit onto the panel of the control panel.
(for M4 screw)
(4)
(3)
WS4
W
Q68B Q612B Q52B
5 5 4
328 439 106
15.5
190±0.3 -
227±0.3 -
- - 83.5±0.3
98
7
80±0.3
Application
27
[mm]
WS3
Q55B
4
189
-
-
167±0.3
IB-1501452-C