Base Unit; Basic Base Unit - Mitsubishi Electric C80 Series Connection And Set Up Manual

C80 Series Connection and Setup Manual
4 General Specifications

4.2 Base Unit

4.2.1 Basic Base Unit

32.5
n
W
WS1
WS2
WS3
WS4
WS1+WS2
WS3+WS4
Number Name
(1) Extension cable connector (OUT)
(2) Extension connector cover
(3) Module connector
(4) Module fixing hole
(5) Base unit installation hole
(6) DIN rail adapter mounting hole
(7) Guide
(8) Production information marking
(1) (2) (5)
n - M4x14
(8)
15.5
(6)
R35B R38B R312B
4 5
245 328 439
- 190±0.3 190±0.3
- 116±0.3 227±0.3
- (170) (170)
- (138) (249)
222.5±0.3 -
(224.5) -
[mm]
A connector for connecting to an extension base unit. A MELSEC iQ-R series extension
cable is connected here.
When no cable is connected, attach the supplied extension connector cover to prevent
entry of foreign matter such as dust.
A protective cover for the extension cable connector.
A connector for mounting MELSEC iQ-R series modules.
Attach the supplied connector cover or the blank cover module (RG60) to the connector(s)
where no module is mounted to prevent entry of foreign matter such as dust.
A screw hole to fix a module to the base unit (M3×12 screw)
A hole to install a base unit to a control panel. (M4 screw)
A hole to mount a DIN rail adapter.
A guide to mount a module to the base unit.
Shows the production information (16 digits) of the module.
(4)
(3)
WS1
WS3
W
5
-
-
Description
25
[mm]
(7)
WS2
WS4
IB-1501452-C