Replacing An Emergency Door Release Button - Huawei FusionModule1000A40 ICT Solution Maintenance Manual

FusionModule1000A40 ICT Solution
Maintenance Guide
Figure 4-55 Connecting cables
Step 5 Check that the new magnetic lock is working properly.
----End
Follow-up Procedure
Dispose of the removed magnetic lock that is confirmed faulty.

4.3.11.4 Replacing an Emergency Door Release Button

Prerequisites


Impact on the System
None
Preparations
Tools: insulation tape, step ladder (2 m), Phillips screwdriver, protective gloves
Material: spare emergency door release button
Documents: none
Skill requirement: weak-current engineer
Procedure
Step 1 Remove the emergency door release button.
Issue 01 (2019-03-05)
If the magnetic lock indicator is green when the container door is closed and red when the door is open,
the magnetic lock is working properly.
The emergency door release button needs to be replaced.
A spare emergency door release button of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
112