Routine Maintenance; Container Repainting - Huawei FusionModule1000A40 ICT Solution Maintenance Manual

FusionModule1000A40 ICT Solution
Maintenance Guide

3.1 Container Repainting

Prerequisites


Context
The FusionModule1000 container exterior should be intact. If the container surface is bumped,
scratched, or rusted, the paint should be repaired.
Table 3-1 Paint repair
Paint Damage
Slight scratch (steel
base material not
exposed)
Smudges and rust
that cannot be wiped
off
Issue 01 (2019-03-05)
The outdoor area without shelters is not subject to bad weather conditions such as raining,
sandstorm, strong wind, or snowing during paint repair.
You have prepared the required paint that matches the color palette delivered with
equipment.
Check the damage to the container paint and prepare appropriate tools and materials. The number of
materials depends on site requirements.
Tools and
Materials
Spray paint or paint,
brush (required for
repainting a small
area), fine
sandpaper,
anhydrous alcohol,
cotton cloth,
painting gun
(required for
repainting a large
area)
Copyright © Huawei Technologies Co., Ltd.
3

Routine Maintenance

Procedure
Steps 1, 2, and 4
3 Routine Maintenance
Description
1. For the color of
the finish coat
(acrylic acid
paint), see the
delivered color
palette and
pantone No.
specified on it.
2. For a few
smudges,
scratches or
7