Replacing A Fire Alarm Control Panel (Standard) - Huawei FusionModule1000A40 ICT Solution Maintenance Manual

FusionModule1000A40 ICT Solution
Maintenance Guide
4.
----End
Follow-up Procedure
Dispose of the removed fire cylinder that is confirmed faulty.

4.4.1.10 Replacing a Fire Alarm Control Panel (Standard)

Prerequisites
A spare fire alarm control panel of the same model is available and functional.
Impact on the System
The fire extinguishing system stops working during the replacement.
Preparations
Tools: diagonal pliers, insulation tape, gloves, Phillips screwdriver
Materials: spare fire alarm control panel
Documents: delivered with the fire alarm control panel
Skill requirement: fire engineer
Issue 01 (2019-03-05)
Figure 4-88 Removing the safety pin
Reinstall and tighten all screws.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
143