Replacing An Emergency Light (Ce) - Huawei FusionModule1000A40 ICT Solution Maintenance Manual

FusionModule1000A40 ICT Solution
Maintenance Guide
Step 7 Put the corrugated pipes and cables back to the box, and reconnect the cables according to
labels.
Step 8 Put the batteries to the same position.
Step 9 Switch on the input circuit breaker of the extinguishant control panel, and connect the battery
cables.
Step 10 Check whether the new extinguishant control panel is working properly.
----End
Follow-up Procedure
Dispose of the removed extinguishant control panel that is confirmed faulty.

4.4.2.11 Replacing an Emergency Light (CE)

Prerequisites
A spare emergency light of the same model is available and functional.
Impact on the System
None
Preparations
Tools: Phillips screwdriver, flat-head screwdriver, step ladder, protective gloves
Materials: spare emergency light
Documents: none
Skill requirement: fire engineer
Procedure
Step 1 Disconnect the power plug of the emergency light.
Issue 01 (2019-03-05)
If the power indicator is on and the alarm indicator is off, the fire control panel is working properly.
For the diagrams, see the initial configuration parameter manual for the solution in use.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
166