FusionModule1000A40 ICT Solution
Maintenance Guide
2.
3.
4.
Issue 01 (2019-03-05)
Two persons work together. One person supports the air conditioner at the top to prevent
it from toppling, while the other person pulls the beam at the air conditioner bottom
towards the long aisle until the air conditioner reaches the cold aisle entrance.
After moving the air conditioner by about 300 mm, the other person can go to the other side of the air
conditioner to push the air conditioner.
Figure 4-35 Moving the air conditioner (1)
Place the three 0.5 m long DN32 steel pipes evenly in the long aisle near the entrance of
cold aisle B.
Push air conditioner D1 completely onto the three 0.5 m long DN32 steel pipes, and
move the air conditioner along the long aisle to the pre-fab. module side door.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
89