Huawei FusionModule1000A40 ICT Solution Maintenance Manual page 18

FusionModule1000A40 ICT Solution
Maintenance Guide
Figure 3-5 Repainting using a brush
Figure 3-6 Repainting using a painting gun
----End
Follow-up Procedure
Check whether the surface meets the requirement after repainting.
Issue 01 (2019-03-05)
The repainted area should have the same color as surrounding areas. The color difference δE is not
greater than 3 (Use a colorimeter to measure the color difference. If a colorimeter is not available, check
that no obvious edge exists between the repainted area and its surrounding.) The paint should also be
free from bulges, scratches, flake-off, or cracks.
Copyright © Huawei Technologies Co., Ltd.
3 Routine Maintenance
11