Replacing A Fire Cylinder (Standard) - Huawei FusionModule1000A40 ICT Solution Maintenance Manual

FusionModule1000A40 ICT Solution
Maintenance Guide
Figure 4-78 Securing the fixing plate
Step 7 Switch on the standby power supply to the fire alarm control panel.
Step 8 Check that the new batteries are working properly.
----End
Follow-up Procedure
Dispose of the removed fire alarm control panel batteries that are confirmed faulty.

4.4.1.9 Replacing a Fire Cylinder (Standard)

Prerequisites
A spare fire cylinder of the same model is available and functional.
Impact on the System
The fire extinguishing system stops working during the replacement.
Preparations
Tools: pallet truck, Phillips screwdriver, protective gloves, adjustable wrench
Materials: spare fire cylinder, sealing tape
Documents: fire extinguishing device layout diagram (standard)
Skill requirement: fire engineer
Issue 01 (2019-03-05)
If the BATTERY FAULT indicator on the fire alarm control panel is off, the new batteries are working
properly.
Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
136